The Bosch code pad is very easy to understand and operate.
When leaving your premises, simply hold down the “away” button for two seconds and the alarm will turn on after a short delay. This delay time is set when the alarm is installed so you have sufficient time to leave the premises before the alarm turns on.
When you carrice at your premises, you enter the four digit code and press the “away” button. Example, you would press 1 2 3 4 and the “away” button if your code was 1234.
You only have to enter the code when you are entering the premises, not when leaving.
In a residential environment, when going to bed, you simply press the “stay” button. If you would like to use the night mode, the technician when installing your system will set the alarm up so at night you can have some detectors on and some off. Business premises can also use this “partial arming mode” such as, office off and warehouse on etc.
The large easy to read buttons are also backlit at night so they are easy to see and feel during the day or at night.
The emergency buttons are activated by holding down the two appropriate Fire, Medical or Panic buttons.